Mighty Mounts Virus Control Spray

Order Code: MM246

Specially Designed Antimicrobial coating For HVAC Filters.

Combination of metal nano particles and non-migratory cationic preservative is extremely effective in deactivation of an enveloped RNA virus and bacterial DNA genome.

Coating remains active on surface for a minimum of  5-10 washes if not damaged mechanically.

KEY FEATURES: 
• Waterborne layer protection against virus & bacteria.
• Breathable Anti-microbial coating for HVAC filters.
• Provides effective germ protection up to a minimum of 5-10 washes
• Does not affect the original feel and appearance
• Reduces bad odour emission.

Mighty Mounts Ultracorr Rust Remover

Order Code: MM251

1. Recommend to use ULTRACORR CLEANZER- RM to remove rust also removes dust, dirt, oil, grease from old machine
A. Shut-down the machine
B. Before the application clean the application area by water
C. Dilute ULTRACORR CLEANZER- RM with 3-5 parts of water and apply using low pressure plastic sprayer (Mix the solution well)
D. Wet the tubes, coil & Spray the mixture on tubes & coils. Avoid splash while applying
E. Spray evenly on coil starting from top in horizontal direction. Wait 30 second and
then spray in vertical direction
F. Wait the 3-5 minute till foam pushes dirt and other contaminants from tubes and then
take a wire brush and remove the rust from the copper tubes.
G. Wash the treated area thoroughly to completely with water to remove the trace of rust
remover. If required wash 2 to 3 times with water & allow it complete dry

Mighty Mounts Ultracorr Corrosion Coating Protection

Order Code: MM248

  • Excellent anti-corrosion performance in any harsh environment
  • Provides sacrificial and barrier protection
  • Enhance service life of condenser
  • Excellent adhesion and film hardness and dissipates heat
  • Excellent resistant against chemicals, acids and alkaline cleaners
  • Ideal for residential, commercial and industrial AC, HVAC, AHU, VRF & Chillers

Mighty Mounts Mighty Eco Drain Pump

Order Code: MM243

Features:

  • Submersible secondary reservoir included
  • Plug & play
  • Anti-siphon device

Applications:
High wall split systems; Ducted units; Floor standing.

Description:
Voltage                        :   100-230V / 50-60 HZ
Discharge Head         :   Max. 8m (26ft)
Flow Rate                    :   Max. 18 L/h (4.8GPH)
Tank Capacity            :   35ml
Mini Splits up to        :   8KW ( 30,000btu/hr)
Sound Level at 1m     :  19db (A)
Ambient Temp.          : 0° C ~ 50° C
Power Consumption  : 3 W

Blue Science UV AIR DISINFECTION SYSTEM

Order Code : BD22

HOW DOES IT WORK?
It utilises the disinfectant properties of UV-c light to convert an air-conditioning unit into a powerful air sanitiser. Warm and contaminated air is pulled in through the top of the unit, where it is then cooled via the unit’s cooling coil. It immerses the air around the cooling coil in UV-c light, sanitising it during the process. The cool air is then dispensed by the air-conditioning unit free of virus, bacteria, moulds and odours.

WHAT ARE THE BENEFICIAL USES OF UV-C?
UV-c technology is a proven non-chemical approach to disinfection of water, air and surfaces. In this method of disinfection no substance is applied to the unit – making it a simple, inexpensive, and a very low maintenance method.

 

 

Refco REFMATE-2-CA-WTC Digital Manifold

Order Code : REF175

This is the Digital Manifold for the professional refrigeration engineer. It communicates wirelessly with temperature clamps, pressure gauges, and the scale, and documents all measured values in the device during long-term measurements. All data can be interpreted and displayed via the app REFMESH. The latest refrigerant and firmware updates can be easily installed via PC.

  • Patented analog display
  • Large 4.3″ TFT display
  • Indication of superheating and subcooling
  • Intuitive control via robust push buttons
  • High precision with accuracy class 0.5
  • Flexible power supply (AA batteries or USB)
  • Wireless communication with REFMESH App and other devices
  • All mechanical components are available as spare parts
  • Lockable for long-term measurements

Refco Charging Hose 5 Ft.

Order Code : REF46A/B

Set of 3 charging hoses, R410A/R32, 60″/150 cm blue & red: 1x straight 1/4″ SAE, 1x bended 1/2″-20UNF (5/16″ SAE) with core depressor, yellow: 1x straight 1/4″ SAE, 1x bended 1/4″ SAE with core depressor

  • Red and blue hose with 1/2″-20UNF and 1/4″ SAE connection
  • Yellow hose with 1/4″ SAE connection on both ends
  • Long-life PTFE seal with blow-out preventer, replaceable
  • 60 bar working pressure
  • 300 bar Burst Pressure
  • High-quality rubber compound for high elasticity, against hardening and embrittlement

Refco Charging Hose 5 Ft.

Order Code : REF45

Set of 3 charging hoses, 1/4″SAE, 60″/150 cmblue, red & yellow, 1x straight 1/4″ SAE, 1x bended 1/4″ SAE with core depressor

  • Longlife PTFE seal with blow-out preventer, replaceable
  • 60 bar working pressure
  • 300 bar Burst Pressure
  • High quality rubber compound for high elasticity, against hardening and embrittlement

Refco Charging Hose 3 Ft.

Order Code : REF44A/B

Set of 3 charging hoses, R410A/R32, 36″/90 cm blue & red: 1x straight 1/4″ SAE, 1x bended 1/2″-20UNF (5/16″ SAE) with core depressor yellow: 1x straight 1/4″ SAE, 1x bended 1/4″ SAE with cor

  • Red and blue hose with 1/2″-20UNF and 1/4″ SAE connection
  • Yellow hose with 1/4″ SAE connection on both ends
  • Longlife PTFE seal with blow-out preventer, replaceable
  • 60 bar working pressure
  • 300 bar Burst Pressure
  • High quality rubber compound for high elasticity, against hardening and embrittlement

Testo 905 i – Thermometer with Smartphone Operation

Order Code : Testo14

  • Compact professional measuring instrument from the Testo Smart Probes series, for use with smartphones/tablets
  • Measurement parameter detection and selection via the socket assignment
  • Fast identification of temperature changes by graph curve display
  • Measurement data analyzed and sent via testo Smart App
  • Space-saving and easy to transport

Testo – 557 – 4 Valve digital manifold kit with Bluetooth and external vacuum gauge

Order Code : Testo04

  • Measures high side / low side pressures and temperatures
  • Simultaneous, real-time super heat and sub-cooling
  • External vacuum probe for faster and more reliable evacuation of the system
  • App integration via Bluetooth for fast and convenient remote monitoring and reporting via email
  • Refrigerant updates to the instrument via App
  • 4-way valve block with 1/4 in. and 3/8 in. ports

Mighty Mounts STAINLESS STEEL Two Stage Nitrogen Pressure Regulator (MM229)

Order Code : MM229

• Ideal for use with Nitrogen gas.
• Two Stage design yields a delivery pressure change of less that 0.05%.
• Stainless steel prevents atmospheric corrosion at read more.

PRESSURE RANGE
• Max. Inlet pressure: 150 kg/cm2
• Outlet pressure range: 0.20 kg/cm2
• Inlet pressure gauge range: 0-280 kg/cm2 or equivalent. (Indian gauge)
• Outlet pressure gauge range: 0.42 kg/cm2 or equivalent. (Indian gauge)

TYPICAL APPLICATIONS
• Gas & liquid chromatography
• Zero & calibration gases
• Research laboratories
• High purity carrier gases
• Gas cylinder regulator assemblies
• Hydrocarbon service
• Cryogenic gases
• HVAC / R

Errecom Cool- Shot Ultra Injector 6ml

Order Code : ERR46

Features :

  • FOR PREVENTIVE USE IN NEW SYSTEMS:
    It avoids the formation of the “Oil Fouling” phenomenon.
    It maintains the performance of the system.
  • FOR USE IN A RESOLUTIVE FORM IN WORKING SYSTEMS:
    It eliminates the “Oil Fouling” phenomenon by restoring the
    initial performance of the system
    It restores the heat exchange of the refrigeration lines.
    It reduces the energy consumption of the system.
  • CARTRIDGE TECHNOLOGY:
    Compatible with all Refrigerant Gases, including CFC, HFC,
    HCFC, R32 and HFO.

 

pdf-Coolshot
 

 

 

 

 

Mighty Mounts Mighty Drain Tablets

Order Code: MM224
  • NO BIOCIDE
    Specially designed for  Fan-Coils & Condensate Collection Trays.
  • NO CLOGGING
    Largely prevents the formation of algae, slime & moulds that can
    cause clogging & block condensate drain pipes of A/C systems.
  • EASY TO USE
    Simply place tablets inside the condensate drain duct of the
    fan-coil unit or inside the condensate collection tray in split units
    in the farthest point from the drainage discharge.
  • AVERAGE USAGE
    1 or 2 tablets every 15/20 days for units up to 12.000 Btu/H (3 KW – 1 TON).
    For Split AC – 1 Tablet & Ductable up to 8.5 Tr. – 2 Tablets.
  • Quantity
    1 bottle : 15 Tablets.
 

 

Errecom Cool- Shot Injector 30 ML (ERR15)

Order Code : ERR15

Features :

* FOR PREVENTIVE USE IN NEW SYSTEMS:
It avoids the formation of the “Oil Fouling” phenomenon.
It maintains the performance of the system.

* FOR USE IN A RESOLUTIVE FORM IN WORKING SYSTEMS:
It eliminates the “Oil Fouling” phenomenon by restoring the
initial performance of the system
It restores the heat exchange of the refrigeration lines.
It reduces the energy consumption of the system.

* CARTRIDGE TECHNOLOGY:
Compatible with all Refrigerant Gases, including CFC, HFC,
HCFC, R32 and HFO.

 

 

 

 

 

BlueDiamond MaxiBlue With Temperature Sensor

Order Code: BD04

  • Designed for high humidity environments and with high performance, the MAXIBLUE® is ideally suited for mid range air conditioning systems.
  • The MAXIBLUE® is ideal for installations in environments that are both demanding and expensive to access for maintenance.

PERFORMANCE –

Max Flow  – 14 L / Hour

Max Head – 8 Meters

Max Lift – 8 Meters

BlueDiamond MicroBlue With Temperature Sensor

Order Code: BD17

  • It is no additional silencing accessories required, not only is the MICROBLUE® a silent running pump but it can also be mounted in any orientation whilst operating both wet and dry continuously.
  • The MICROBLUE® is a dual voltage pump which uses proven thermistor level sensing technology to remove the risk of stuck or sunken float switches.

PERFORMANCE –

Max Flow  – 5 L / Hour

Max Head – 5 Meters

Max Lift – 2 Meters

 

BlueDiamond MicroBlue With Reservoir

Order Code: BD07

  • It is no additional silencing accessories required, not only is the MICROBLUE® a silent running pump but it can also be mounted in any orientation whilst operating both wet and dry continuously.
  • The MICROBLUE® is a dual voltage pump which uses proven thermistor level sensing technology to remove the risk of stuck or sunken float switches.

PERFORMANCE –

Max Flow  – 5 L / Hour

Max Head – 5 Meters

Max Lift – 2 Meters

Mighty Mounts 16 CFM Vacuum Pump With Digital Vacuum Gauge

Order Code : MM191

  • Suitable for R32 & HFO-1234YF
  • Built in vacuum gauge – Large backlit LCD display. German sensor audiblae & visual alarms for notification when preset alarm thresholds are met
  • Built in solenoild Valve – Automatically close the inlet port to avoid reflux of oil when power off
  • Four Way Inlet Fitting – Increase the flow rate more options for hose size.
  • Gas Ballast – Avoid condensation for prolong use of vacuum pump oil.
  • Ceramic Bushing – Enclosing inside the oil seal to guarantee reliable operation for a longer time.
  • Filter Element – Prevent from oil contamination to the sensor of vacuum gauge
  • Air Passage – Air Exhaust: Inlet port filter-solenoid valve -pump body- Exhaust port
    Vacuum Test: Inlet port filter-Vacuum sensor
  • Variable Speed Motor

 

BlueDiamond Mini Blue With Temperature Sensor

Order Code: BD02

  • Running either wet or dry, the MINIBLUE® is whisper quiet whilst reliably removing condensate and debris.
  • Inherently reliable whilst self priming it gives peristaltic performance at the price of a piston pump.
  • It is small enough to quickly fit, or retro fit, into any existing installation, saving both time and money.

PERFORMANCE –     

Max Flow – 8 L / Hour

Max Head – 8 Meters

Max Lift – 5 Meters

Imperial 865CSC 4 Way Manifold With Sight Glass

Order Code: IMP41

 

  • Equipped with 3/8″ vacuum ports & oversized  internal passages for 4 times faster evacuation than conventional manifolds.
  • Deep Vacuum diaphragm diaphragm-type, soft-seat valves require only fingertip pressure to close completely or open for full-flow.
  • Patented gauges provide superior resistance to vibration & pulsation for accurate performance & extended gauge life.
  • For R22, R410A, R407C.

Imperial 803-MRS Charging Hose 3Ft.

Order Code: IMP16

*Rugged, Multi-Refrigerant Nylon Barrier Construction – PolarShield hoses are compatible with all CFC, HFC & HCFC refrigerants (R-410A, R-404A, R-407C, R-134a).

*High-Pressure – PolarShield hoses feature 800 PSI working pressure and 4,000 PSI burst pressure.

*Hose connections – ¼” x ¼”

Imperial 805-MRS Charging Hose 5Ft.

Order Code: IMP38

* Rugged, Multi-Refrigerant Nylon Barrier Construction – PolarShield hoses are compatible with all CFC, HFC & HCFC refrigerants (R-410A, R-404A, R-407C, R-134a).

* High-Pressure – PolarShield hoses feature 800 PSI working pressure and 4,000 PSI burst pressure.

*Hose connections – ¼ x ¼.

Imperial 195-FCSP 45° Flaring Tool (3/16 TO 5/8)

Order Code: IMP01

  • Flares sizes – 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” and 5/8” O.D. tubing.
  • Rugged forged steel slip-on yoke and hardened flaring bar. Positive clamping action of bars prevents tube slippage.
  • Self-centering yoke with swivel-type, hardened steel, chrome finished flaring cone forms better flares with less effort.

Imperial 175-EX Expander Kit (3/8 TO 7/8)

Order Code: IMP32

  • Easily expands tube for braze or soldered joints in seconds.
  • Floating jaw head design is self-centering for fast, accurate alignment.
  • Re-rounds deformed tube ends.
  • Accurate joints in seconds without using fittings.
  • For soft copper and soft thin wall steel and stainless steel tubing.
  • Save 60-70% of time over conventional swaging tools.
  • Reduces soldering by 50% over standard fittings.
  • Meets ARI tube insertion recommendations.
  • Long life with high alloy hardened steel jaw segments.
  • Includes 5 heads: 3/8”, 1/2”, 5/8”, 3/4” and 7/8”.

Imperial 275-FS Flaring & Swaging Tool (1/8 TO 3/4)

Order Code: IMP31

  • For 1/8” to 3/4” (4 mm to 22 mm) O.D. tubing.
  • Swivel-type swaging adapters and flaring cone are hardened steel, chrome finished for easy operation.
  • Self-centering, slip-on forged steel yoke. Includes tool case. Wt. 3.5 Ibs.
  • Flares 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” and 3/4” O.D. Includes 5 swage adapters for 7 tube sizes: 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” O.D.

Imperial TC-1000SP Tube Cutter 1/8 TO 1 1/8

Order Code: IMP05

  • Enclosed hardened steel, thrust bearing feed mechanism for smoothest cutting action and trouble free operation.
  • Unique design eliminates spiraling for clean right angle cuts.
  • Rugged aluminum alloy body designed for handling ease.
  • Body is hand buffed and nickel chrome plated to a high-luster finish.
  • Foldaway hardened steel reamer with turned cutting edge removes inside burrs cleanly.
  • Filing surface removes outside burrs.
  • Rollers feature flare cut-off groove to reduce tube loss when damaged flare is removed.

Robinair RA 13203 Vacuum Pump Oil

Order Code: ATP119

  • Chemically engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts
  • Thermal stability – resists break-down due to heat
  • Lower moisture content – due to special packaging and handling procedures
  • Maximizes vacuum pump life when used in Robinair and other high vacuum pumps

Robinair Recovery Unit RG6-E

Order Code: ATP148

  • Fastest ever Recovery Machine
  • Twin cylinder Oil-less compressor increases recovery rates while keeping weight and size down.
  • Recovers all commonly used CFC, HCFC and HFC refrigerants, including A2L
  • Self Purge feature included
  • Integrated Inlet Filter Screen
  • Vacuum cut-out switch enables selectable low pressure “cut-off”

Robinair 4.5 CFM Vacuum Pump

Order Code : ATP144

  • 4.5 CFM two stage vacuum pump
  • Suitable for R32.
  • For class A2L refrigerants & others
  • Also for use with Ammonia (NH3)
  • Spark free electronic motor cut-out & on-off switches
  • The two-stage rotary vane design provides powerful, quiet and high vacuum capability. It ensures moisture removal and reduces evacuation time
  • The gas ballast allows a precise amount of atmospheric air to be introduced into the pump, preventing condensation of moisture vapour – which maintains the purity of the pump oil
  • The aluminium housing and a moulded handle makes the pump not only lightweight, but easy to carry

Robinair 10 CFM Vacuum Pump

Order Code : ATP149

  • 10 CFM Two Stage Vacuum Pump
  • Two stage design: Second stage pumps at a lower pressure creating a deeper vacuum pull
  • Offset rotary vanes improve vacuum pull
  • Gas Ballast features reduces moisture condensation in the pump oil
  • 1/4 turn of the “Iso-valve” isolates the pump from the system
  • Built-in check valve prevents oil from being sucked into the system during a power loss
  • Durable, yet lightweight aluminum casing
  • Polycarbonate base improves pump balance and minimizes vibration

Robinair TIFXP-1A Leak Detector

Order Code: ATP146

  • Microprocessor controlled circuit with Advanced Digital Signal Processing, monitors the sensing tip up to
    2000 times per second
  • Detects all halogenated refrigerants
  • 14″ Flexible stainless steel probe with Teflon™ liner
  • Variable frequency audible alarm

Testo 549 i & 115 i Digital manifold With Bluetooth

Order Code: Testo02

The testo Smart Probes AC & refrigeration test kit is ideally suited for testing air conditioning and refrigeration systems and installing them. The large testo HVAC softcase enables the measuring instruments to be conveniently transported and ensures that they are always to hand when they are needed.

* Fast and simple installation of the testo 549i high-pressure measuring instrument directly onto the pressure
connection
* Low refrigerant loss thanks to hoseless application
* Automatic calculation of evaporation and condensation temperatures and simple selection from more than 80
refrigerants via testo Smart Probes App
* Large testo HVAC softcase: store additional testo Smart Probes for further applications in the heating, air
conditioning and ventilation field safely

Testo 410 i Vane anemometer with Bluetooth

Order Code: Testo01

Professional measuring technology in a small format: the compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at air outlets quickly and reliably. The testo Smart Probes App enables readings to be viewed conveniently and offers intelligent additional functions.

* Measurement of air velocity, volume flow and temperature
* Display of the volume flow of multiple outlets in order to adjust systems
* Easy parametrization of the outlet (dimension and geometry)
* Convenient viewing of readings on a smartphone/tablet with the testo Smart Probes App

 

 

Testo 552 Digital Vacuum Gauge With Bluetooth

Order Code: Testo03

Extremely precise, rugged and practical: the testo 552 digital vacuum gauge. Ideal for evacuating refrigerant systems or heat pumps.

* Measurement data monitoring via testo Smart Probes App
* Measurement data dispatch via testo Smart Probes App
* Extremely precise, extremely rugged, extremely practical – with visual alarm and backlit display
* Measures pressure and calculates the evaporation temperature of H2O automatically

Microdam Apollo Plus Condensate Drain Pump

Order Code : MD04

Features :

The Apollo Plus is an electromagnetic piston pump that is 
optimally designed to be installed under wall split air conditioners.

  • Compact size and Light weight for wall mounting location.
  • Built-in Check Valve preventing Back-flows.
  • Low Noise with vibration absorbing system.
  • Built-in Filter at lnlet hole.
  • Easy to clean (Openable Cover to clean the reservoir / Removable filter).
  • Low power consumption. 

Technical Specifications –

*Power Supply : 110~120 V 60 Hz or 220~240 V 50/60 Hz
*Ambient Temperature : 0 ℃ ~ 50 ℃
*Thermal Protection : Cut-out at 100 °C as per Each Model
*Discharge Head : Max. 8m