Mastercool

Mastercool 90010-6 & 90018-6 Vacuum Pump Oil

Mastercool 90010-6 & 90018-6 Vacuum Pump Oil
Order Code :
MS65 & MS67

Features :

This vacuum pump oil is engineered to maintain maximum viscosity to keep the pump operating at peak efficiency in any climate. Moisture, heat and other contaminants can quickly deteriorate the purity of the oil causing inefficiency during deep vacuum conditions.

  • Frequent oil changes will reduce vacuum pump failure and extend the pump life.
  • Thermally stable.
  • Laboratory tested resists breaking down.
  • High viscosity.
  • Available in 295ml. (MS 65) & 531ml. (MS 67) bottles.
  • A Quality product from Mastercool, USA.

Mastercool 69300 Twin Turbo Recovery machine

Mastercool 69300 Twin Turbo Recovery machine
Order Code : MS06

Features :

  • Largest volume recovery rate in Market.
  • Revolutionary double piston oil less compressor.
  • Auto low pressure switch for durability of compressor.
  • Safety high pressure switch.
  • Simple internal structure for field service.
  • For use with all refrigerants including R410A.
  • A Quality product from Mastercool, USA.

Mastercool 69350-Twin Turbo Recovery unit with Oil Separator

Mastercool 69350-Twin Turbo Recovery unit with Oil Separator
Order Code : MS05

Features :

  • Largest volume recovery rate in Market.
  • Revolutionary double piston oil less compressor.
  • Auto low pressure switch for durability of compressor.
  • Safety high pressure switch.
  • Simple internal structure for field service.
  • For use with all refrigerants including R410A.
  • Comes with an oil separation module, filter dryer and sight glass.
  • A Quality product from Mastercool, USA.

 

Mastercool 62010 – EUGRY 12.5 L. Recovery Cylinders

Mastercool 62010 – EUGRY 12.5 L. Recovery Cylinders
Order Code : MS39

Features :-

  • Y-valve for liquid/vapour TPED approved.
  • Single valve for vapour TPED approved.
  • Raised collar for ease of handling and protection.
  • Tanks Conform to PED and ADR regulations.
  • CE and TÜV approved.
  • Used for storage and transport of refrigerant gases.
  • A Quality product from Mastercool, USA.

    Applications :-

  • Capicity :- 12.5 Liter.
  • Valves : – Double Valve.
  • Connection :- 1/4″ FL-M (7/16-20).
  • Size (w x h) :- 228mm x 516mm.
  • Tare Weight :-  8 kg.
  • Standard Specification :-  ADR/RID2009 EN13322-1N D TUV 1.
  • Nominal Water Capacity :-  12.5 l
  • Service Pressure :-  32 bar.
  • Tank Test Pressure :- 48 bar.
  • Air Tightness Test Pressure :- 32 bar.
  • Bursting Pressure :-  >108 bar.
  • Bursting Volumetric Expansion Rate :- >20%.
  • Body Material : HP295.

Mastercool 91580 Portable Electronic Charging Station

Mastercool 91580 Portable Electronic Charging Station
Order Code : MS13

Features :

  • Rugged, lightweight steel cart with wheels.
  • Storage pocket for scale & hoses.
  • No need for different sized charging cylinders with Mastercool’s rugged die cast electronic scale.
  • Just place the refrigerant cylinder on the scale and charge.
  • Extruded aluminium manifold with long lasting valve design.
  • 109 kg capacity scale with long lasting 9V battery ( 60 hrs).
  • Large 80mm Guages make it easy to read pressure & temperature scales.
  • A Quality product from Mastercool, USA.

 

Mastercool 69788 Automatic Automotive Car AC Service station

Mastercool 69788 Automatic Automotive Car AC Service station
Order Code : MS01

Features :

  • Recovery / Recycle / Recharge.
  • Database – Includes Refrigerant & Oil capacities for over 1000 vehicles.
  • Automatic Recovery – Recycle.
  • Automatic programmable Vacuum & Charging.
  • 3 Pressure Level Gauges.
  • LED Display.
  • A Quality product from Mastercool, USA.

 

 

http://www.youtube.com/watch?v=J-4ZnO86IQU&feature=related

 

Mastercool 82934 – E & 82834 – E R134A Manual Couplers

Mastercool 82934 – E & 82834 – E R134A Manual Couplers
Order Code : MS37 & MS38

Features :-

  • Patented manual couplers adjust easily to R134a service ports with varying dimensions.
  • All metal construction for extra durability.
  • Patented, spring loaded depressor will not damage service valves.
  • Can be removed from service ports regardless of knob position without losing refrigerant.
  • Meets SAE, UL and EPA requirements for containment of refrigerant.
  • Color coded.
  • A Quality product from Mastercool, USA.

Mastercool 52229 Handheld Waterproof Digital Thermometer

Mastercool 52229 Handheld Waterproof Digital Thermometer
Order Code : MS29

Features :

  • Temperature range : -58 to 572° F ( -50 to 300° C ).
  • Minimum / Maximum temperature memory.
  • Data hold function.
  • Celsius & Fahrenheit exchange.
  • High / Low temperature alarm setting.
  • Foldaway stand.
  • A Quality product from Mastercool, USA.

Mastercool 52226 Infrared Thermometer With Contact Probe

Mastercool 52226 Infrared Thermometer With Contact Probe
Order Code : MS16

Technical Specifications :

  • Has both – Infrared and Contact Probe technologies.
  • Infrared Temp Range : -67 to 428° F ( -55 to 220° C ).
  • Probe Temp Range : – 67 to 626° F ( -55 to 330° ) C.
  • Field of View Ratio – 1 : 1.
  • Contact Probe locks safely on the side of the unit.
  • Lock mode for Hands Free Scanning.
  • A Quality product from Mastercool, USA.

Mastercool 52225 B Ultra Temp Dual Laser Thermometer

Mastercool 52225 B Ultra Temp Dual Laser Thermometer
Order Code : MS36

Features :

  • Features Both Infrared and contact thermometer technologies.
  • Includes programmable HI / LO alarms.
  • LOCK mode to capture temp. readings.
  • Illuminates working area with built-in LED.
  • A Quality product from Mastercool, USA.

Technical Specifications :

  • Non- Contact Temp. Range : – 76 to 1832°F ( -60 to 1000° C ).
  • Field of View – 50 : 1.

Mastercool 52224 C Infrared Thermometer with Dual Laser

Mastercool 52224 C Infrared Thermometer with Dual Laser
Order Code : MS15

Technical Specifications :

  • Features Both Infrared and Dual Laser technologies.
  • Dual Laser Spot.
  • Temperature range : -76 to 1022°F / -60°C to 550°C.
  • Field of view Ratio – 12 : 1.
  • Backlit LCD Display.
  • Auto Power Off after 15 seconds.
  • A Quality product from Mastercool, USA.

Mastercool 52224 A Infrared Thermometer With Laser

Mastercool 52224 A Infrared Thermometer With Laser
Order Code : MS27

Technical Specifications :

  • Features Both Infrared and Dual Laser technologies.
  • Single Laser Spot.
  • Temperature range : -58°F to 932°F / -50° to 500°C.
  • Field of view Ratio – 12 : 1.
  • Backlit LCD Display.
  • Auto Power Off after 15 seconds.
  • A Quality product from Mastercool, USA.

Mastercool 99661 A Digital Manifold with Superheat Subcool

Mastercool 99661 A Digital Manifold with Superheat Subcool
Order Code : MS35

Features :

  • Most Advanced & User friendly Digital Manifold.
  • Displays – Pressure; Saturated, Actual, Superheat & Subcooling Temperatures for over 60 refrigerants.
  • Displays actual temp. & calculates Superheat / Subcool temperature.
  • ABS material construction & protected by rugged rubber boot.
  • Deep vacuum display in 7 different units.
  • Pressure display in 5 different units.
  • A Quality product from Mastercool, USA.
 

http://www.youtube.com/watch?feature=player_embedded&v=d6Qsz_g0ZQo

 

 

 

 

 

Mastercool 98210 A Accu Charge II Refrigerant Charging Scale

Mastercool 98210 A Accu Charge II Refrigerant Charging Scale
Order Code : MS19

Features :

  • Most advanced electronic refrigerant scale.
  • Constructed with a rugged aluminium cast body.
  • Accu- Charge II offers programming capabilities.
  • Before charging is complete, an alarm allows user ample time to turn off refrigerant supply.
  • Tank Capacity Programming : allows user to know the amount of refrigerant left in the tank at any time.
  • Repeat : allows user to charge previously stored amount.
  • A Quality product from Mastercool, USA.

Mastercool 52236 Airflow + Psychrometer

Mastercool 52236 Airflow + Psychrometer
Order Code : MS32

Features :

  • Reads – Humidity, Air Temp., Dew Point, Wet Bulb, Air Velocity, Air Volume & BTU.
  • Sensor is built into the remote fan.
  • Protected by a rotating cap.
  • Metric & inch unit selection.
  • Microprocessor circuitry.
  • A Quality product from Mastercool, USA.

Technical Specifications :

  • Temp. Range : -4 to 140 F ( -20 to 60 C ).
  • RH % range : 0 to 100 % RH.
  • Air Volume : 0 to 99999 cfm.
  • Air Velocity : 1 to 114 ft /s.

Mastercool 52230 Pen Type Hygrometer

Mastercool 52230 Pen Type Hygrometer
Order Code : MS30

Features :

  • Rotating cap to protect sensor.
  • Data hold to capture readings.
  • LCD Digital display.
  • Max/ Min record function.
  • A Quality product from Mastercool, USA.

Technical Specifications :

  • Temp. Range : -4 to 140 F ( -20 to 60 C ).
  • RH % range : 0 to 100 % RH.
  • Size : 6.8″ X 1.6″ X 0.6″.

Mastercool 55750 Combustible Gas Leak Detector

Mastercool 55750 Combustible Gas Leak Detector
Order Code : MS34

Features :

  • Most advanced sensor technology and microprocessor.
  • Detects leaks fast and accurately.
  • Flexible 15 ” probe with bright LED light in tip.
  • Six sensitivity levels.
  • Audible leak alarm & visual leak size indicator.
  • Custom moulded carrying case.
  • A Quality product from Mastercool, USA.

Mastercool 98061 Digital Vacuum Guage

Mastercool 98061 Digital Vacuum Guage

 

Order Code : MS14

Features :

  • Sensor – Thermocouple technology.
  • Allows for self – calibration.
  • Sensor does not get damaged by small mists of oil.
  • Target vacuum range can be programmed with a light sensor indicator.
  • Freedom to do other work & come back to the system when indicator light signals the target vacuum.
  • A Quality product from Mastercool, USA.

Mastercool 52236 Airflow+Psychrometer

Mastercool 52236 Airflow+Psychrometer
Order Code : MS32

Features :

  • Reads – Humidity, Air Temp., Dew Point, Wet Bulb, Air Velocity, Air Volume & BTU.
  • Sensor is built into the remote fan.
  • Protected by a rotating cap.
  • Metric & inch unit selection.
  • Microprocessor circuitry.
  • A Quality product from Mastercool, USA.

Technical Specifications :

  • Temp. Range : -4 to 140 F ( -20 to 60 C ).
  • RH % range : 0 to 100 % RH.
  • Air Volume : 0to 99999 cfm.
  • Air Velocity : 1 to 114 ft /s.

Mastercool 3, 6 & 10 Cfm Vacuum pumps

Mastercool 90070 10-cfm Vacuum pump
Order Code : MS02, 03 &04

Features :

  • Durable and time tested.
  • Stands up to the the most gruelling conditions and provide years of reliable service.
  • Ultimate vacuum – 15 microns. ( 3 & 6Cfm )
  • Ultimate vacuum – 12 microns. ( 10Cfm )
  • Slide switch recessed for protection.
  • Vapour discharge / oil fill port, easily removable. Contains internal check valve to prevent escape of liquid oil.
  • Cooling fins to keep temperature cooler during long operations.
  • A Quality product from Mastercool, USA.

Mastercool 99661-A Digital Manifold with Superheat Subcool

Mastercool 99661-A Digital Manifold with Superheat Subcool
Order Code : MS35

Features :

  • Most Advanced & User friendly Digital Manifold.
  • Displays – Pressure; Saturated, Actual, Superheat & Subcooling Temperatures for over 60 refrigerants.
  • Displays actual temp. & calculates Superheat / Subcool temp.
  • ABS material construction & protected by rugged rubber boot.
  • Deep vacuum display in 7 different units.
  • Pressure display in 5 different units.
  • A Quality product from Mastercool, USA.
 

http://www.youtube.com/watch?feature=player_embedded&v=d6Qsz_g0ZQo

 

Mastercool 93636 MR 2-Way RAC Manifold

Mastercool 93636 MR 2-Way RAC Manifold
Order Code : MS17

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm hoses.
  • Free floating piston valve design.
  • Double O- Ring allows for much better seal resulting in less leaks.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R134a, R22, R12, R404A.
  • A Quality product from Mastercool, USA.

Mastercool 93636 E 2-Way RAC Manifold

Mastercool 93636 E 2-Way RAC Manifold
Order Code : MS18

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm hoses.
  • Free floating piston valve design.
  • Double O- Ring allows for much better seal resulting in less leaks.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R410A, R507A, R404A, R22.
  • A Quality product from Mastercool, USA.

Mastercool 57236 MR 2-Way Sight Glass Manifold

Mastercool 57236 MR 2-Way Sight Glass Manifold
Order Code : MS23

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm ball valve hoses.
  • Features Premier Series Ball Valve design.
  • Nylon barrier with in-line ball valve.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R134a, R22, R12, R404A.
  • A Quality product from Mastercool, USA.

Mastercool 57236 E 2-Way Sight Glass Manifold

Mastercool 57236 E 2-Way Sight Glass Manifold
Order Code : MS24

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm ball valve hoses.
  • Features Premier Series Ball Valve design.
  • Nylon barrier with in-line ball valve.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R410A, R507A, R404A, R22.
  • A Quality product from Mastercool, USA.

 

Mastercool 33636 MR 2-Way Brass Manifold

Mastercool 33636 MR 2-Way Brass Manifold
Order Code : MS20

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm hoses.
  • Free floating piston valve design.
  • Double O- Ring allows for much better seal resulting in less leaks.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants -R134a, R22, R12, R404A.
  • A Quality product from Mastercool, USA.

Mastercool 33636 E 2-Way Brass Manifold

Mastercool 33636 E 2-Way Brass Manifold
Order Code : MS22

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm hoses.
  • Free floating piston valve design.
  • Double O- Ring allows for much better seal resulting in less leaks.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R410A, R507A, R404A, R22.
  • A Quality product from Mastercool, USA.

Mastercool HYDRA SWAGE 71650(Tube Expander Kit)

Mastercool HYDRA SWAGE 71650(Tube Expander Kit)
Order Code : MS09

Features :

  • It uses Hydraulic Power to expand Copper, Aluminium and Soft Steel Tubing.
  • The process of Swaging becomes easy and effortless for the HVAC / R technician.
  • Hydra – Swage contains 10 expander heads beginning from size 3/8 ” up to 2 1/8 “.
  • A very innovative and unique product. It can Save you –
    *100 % Of Your Coupling Costs
    *50% Of Your Brazing Costs
    *    Reduce Chances Of Leakages To Half !!!
  • A Quality product from Mastercool, USA.
 

http://www.youtube.com/watch?v=tLmf09FF0kE&feature=plcp

 

 

 

Mastercool Hydra Krimp 71500

Mastercool Hydra Krimp 71500
Order Code : MS10

Features :

  • Fabricating A/C hoses just got easier with the Hydra – Krimp.
  • Hydra- Krimp makes crimping barbed and beaded fittings as easy as 1-2-3.
  • Hand held hydraulic press.
  • Lightweight and very portable .
  • Ideal for carrying to site and field applications.
  • Contains Complete set of dies for hose sizes #6, #8, #10, #12 & reduced barrier sizes #6, #8, #10, #12.
  • A Quality product from Mastercool, USA.

 

 

http://www.youtube.com/watch?v=jkIiSWXhw6w&feature=plcp

 

 

 

Mastercool 71700 Hydraulic Flaring and Swaging Tool

Mastercool 71700Hydraulic Flaring and Swaging Tool
Order Code : MS08

Features :

  • Hydraulic press does both, flaring and swaging.
  • It really takes the work out of Swaging and flaring, especially on larger tube sizes.
  • Includes dies and adapters for copper tubing sizes – 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″ and 7/8″.
  • Comes in custom moulded carrying case.
  • A Quality product from Mastercool, USA.

Mastercool 71550 Manual style AC Hose Crimper

Mastercool 71550 Manua style AC Hose Crimper
Order Code : MS11

Features :

  • Manual style A/C Hose Crimper.
  • Unit can be mounted on a bench using Holding fixture or held securely in a vice.
  • Kit comes with a complete set of dies covering standard hose sizes #6, #8, #10, #12.
  • A Quality product from Mastercool, USA.

 

 

http://www.youtube.com/watch?v=t9D4GC1Plx8&feature=plcp

 

Mastercool 70053 45° Flaring & Swaging Tool Kit

Mastercool 70053 45° Flaring & Swaging Tool Kit
Order Code : MS51

Features :-

  • Durable forged steel slip – on yoke. Bars are chrome plated, hardened steel.
  • Swages in close quarters where punch style cannot be used.
  • Includes custom molded plastic box.
  • 45° Flaring & Swaging Tool set includes.
  • Two flaring Bars covering 9 sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 and 3/4″ O.D. Tubing.
  • Five Swaging Adapters covering 7 sizes: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4″ O.D. Tubing.
  • A Quality product from Mastercool, USA.