Mighty Mounts Virus Control Spray

Order Code: MM246

Specially Designed Antimicrobial coating For HVAC Filters.

Combination of metal nano particles and non-migratory cationic preservative is extremely effective in deactivation of an enveloped RNA virus and bacterial DNA genome.

Coating remains active on surface for a minimum of  5-10 washes if not damaged mechanically.

KEY FEATURES: 
• Waterborne layer protection against virus & bacteria.
• Breathable Anti-microbial coating for HVAC filters.
• Provides effective germ protection up to a minimum of 5-10 washes
• Does not affect the original feel and appearance
• Reduces bad odour emission.

Mighty Mounts Ultracorr Rust Remover

Order Code: MM251

1. Recommend to use ULTRACORR CLEANZER- RM to remove rust also removes dust, dirt, oil, grease from old machine
A. Shut-down the machine
B. Before the application clean the application area by water
C. Dilute ULTRACORR CLEANZER- RM with 3-5 parts of water and apply using low pressure plastic sprayer (Mix the solution well)
D. Wet the tubes, coil & Spray the mixture on tubes & coils. Avoid splash while applying
E. Spray evenly on coil starting from top in horizontal direction. Wait 30 second and
then spray in vertical direction
F. Wait the 3-5 minute till foam pushes dirt and other contaminants from tubes and then
take a wire brush and remove the rust from the copper tubes.
G. Wash the treated area thoroughly to completely with water to remove the trace of rust
remover. If required wash 2 to 3 times with water & allow it complete dry

Mighty Mounts Ultracorr Corrosion Coating Protection

Order Code: MM248

  • Excellent anti-corrosion performance in any harsh environment
  • Provides sacrificial and barrier protection
  • Enhance service life of condenser
  • Excellent adhesion and film hardness and dissipates heat
  • Excellent resistant against chemicals, acids and alkaline cleaners
  • Ideal for residential, commercial and industrial AC, HVAC, AHU, VRF & Chillers

Mighty Mounts Mighty Eco Drain Pump

Order Code: MM243

Features:

  • Submersible secondary reservoir included
  • Plug & play
  • Anti-siphon device

Applications:
High wall split systems; Ducted units; Floor standing.

Description:
Voltage                        :   100-230V / 50-60 HZ
Discharge Head         :   Max. 8m (26ft)
Flow Rate                    :   Max. 18 L/h (4.8GPH)
Tank Capacity            :   35ml
Mini Splits up to        :   8KW ( 30,000btu/hr)
Sound Level at 1m     :  19db (A)
Ambient Temp.          : 0° C ~ 50° C
Power Consumption  : 3 W

Mighty Mounts STAINLESS STEEL Two Stage Nitrogen Pressure Regulator (MM229)

Order Code : MM229

• Ideal for use with Nitrogen gas.
• Two Stage design yields a delivery pressure change of less that 0.05%.
• Stainless steel prevents atmospheric corrosion at read more.

PRESSURE RANGE
• Max. Inlet pressure: 150 kg/cm2
• Outlet pressure range: 0.20 kg/cm2
• Inlet pressure gauge range: 0-280 kg/cm2 or equivalent. (Indian gauge)
• Outlet pressure gauge range: 0.42 kg/cm2 or equivalent. (Indian gauge)

TYPICAL APPLICATIONS
• Gas & liquid chromatography
• Zero & calibration gases
• Research laboratories
• High purity carrier gases
• Gas cylinder regulator assemblies
• Hydrocarbon service
• Cryogenic gases
• HVAC / R

Mighty Mounts Mighty Drain Tablets

Order Code: MM224
  • NO BIOCIDE
    Specially designed for  Fan-Coils & Condensate Collection Trays.
  • NO CLOGGING
    Largely prevents the formation of algae, slime & moulds that can
    cause clogging & block condensate drain pipes of A/C systems.
  • EASY TO USE
    Simply place tablets inside the condensate drain duct of the
    fan-coil unit or inside the condensate collection tray in split units
    in the farthest point from the drainage discharge.
  • AVERAGE USAGE
    1 or 2 tablets every 15/20 days for units up to 12.000 Btu/H (3 KW – 1 TON).
    For Split AC – 1 Tablet & Ductable up to 8.5 Tr. – 2 Tablets.
  • Quantity
    1 bottle : 15 Tablets.
 

 

Mighty Mounts 16 CFM Vacuum Pump With Digital Vacuum Gauge

Order Code : MM191

  • Suitable for R32 & HFO-1234YF
  • Built in vacuum gauge – Large backlit LCD display. German sensor audiblae & visual alarms for notification when preset alarm thresholds are met
  • Built in solenoild Valve – Automatically close the inlet port to avoid reflux of oil when power off
  • Four Way Inlet Fitting – Increase the flow rate more options for hose size.
  • Gas Ballast – Avoid condensation for prolong use of vacuum pump oil.
  • Ceramic Bushing – Enclosing inside the oil seal to guarantee reliable operation for a longer time.
  • Filter Element – Prevent from oil contamination to the sensor of vacuum gauge
  • Air Passage – Air Exhaust: Inlet port filter-solenoid valve -pump body- Exhaust port
    Vacuum Test: Inlet port filter-Vacuum sensor
  • Variable Speed Motor

 

Mighty Mounts Disc Valve

Features :

  • Suitable for rooms that are enclosed spaces; rooms without direct exhaust.
  • Diameter 100, 150 & 200 mm (4″ , 6″ & 8″).
  • Manufactured from white polypropylene (RAL9010); heat resistant to 100 C.
  • Variable air flow control.
  • No leakage between valve body & mounting frame.
  • Simple removal for cleaning.
  • For mounting in places with small spaces, a clamping ring is added.

Mighty Mounts Oil Charging Pump

Order Code :MM91

Features :

  • Foot stand base provides excellent support & leverage while pumping against the high pressures of a running compressor.
  • Design allows technician to add refrigerant oil to a system under pressure.
  • Siphon hose allows for the removal of old oil to prevent over-charging.
  • Pump universally mounts directly to the containers.
  • Pumping of oil can be done directly from the container, keeping oil free from dirt & moisture.
  • Fits all major brands of refrigeration oil.

Mighty Mounts – Mighty Torch with Piezo Ignition

 Order Code-MM43

Features :

  • One-touch automatic piezo-ignition (self – igniting)
  • Light weight & compact
  • Adjustable flame control
  • Ergonomic design fits easily into the hand
  • Uses standard butane/ propane gas cartridge
  • Excellent for soft copper pipes

Applications –

  • Brazing soft copper pipes
  • Lighting BBQ’s and fires
  • Cooking, caramelizing, browning
  • Thawing frozen water pipes
  • Hobby and craftwork, model making
  • Soldering pipe joints
  • Paint stripping

Mighty Mounts Oil Charging Pump

Order Code :MM56

Features :

  • Design allows technician to add refrigerant oil to a system under pressure.
  • Siphon hose allows for the removal of old oil to prevent over-charging.
  • Pump universally mounts directly to the containers.
  • Pumping of oil can be done directly from the container, keeping oil free from dirt & moisture
  • Fits all major brands of refrigeration oil.
  • Operating unit in reverse adaptor hose accessory removes oil from the equipment quickly and efficiently.

Mighty Mounts 12-cfm Vacuum Pump

Order Code : MM03

Features :

  • The sight glass on the front of the pump shows when enough oil has been added
  • Die-cast aluminium housing makes the pump lightweight but durable
  • Forced oil-feed device makes it more reliable when exhausting along with air
  • Anti suck back system
  • Single stage (1.5cfm) & double stage (3.5 & 10cfm) vacuum pumps
pdf-MightyMount10cfmVacuumPump

Mighty Mounts Trolley Recovery Unit

Order Code : MM175

Features :

  • Specially designed for on site convenience of technicians / engineers.
  • Oil – less compressor, capable of handling recovery & filling for varied kinds of refrigerants.
  • Multi – functional valve design, automatic clearance of remaining refrigerants.
  • Pull rod design, convenient for taking out.
  • “Super Cool” fan & efficient condenser design, speed up the recycling & filling.

Mighty Mounts HVAC Professional Heavy Duty Tool Bag with Tools

Order Code : MM01

Features :

  • A strong, sturdy and attractive Back Pack.
  • Contains all required tools for HVAC Service needs.
  • An All – In – One Tool Kit for the Service Engineer/ Technician.
  • Tools made of hi- quality materials and accurate design.
  • Easy to carry and complete !
  • The tool bag consists of –

* Pen Type Thermometer
* Pressure Gauge 0 to 500PSI
* Clamp Meter
* Charging Line 3ft
* Long Nose Plier 6” 70-483
* Hex Key MM Ring (Set of 10 Pcs) 69-213
* Fix Spanner (Set of 8pcs) 70-379
* Combination Plier 8″ 70-482
* Adjustable Spanner 10” 87-433
* Wire Stripper Nos 1 56 40.34
* Screwdriver 6 Way STHT68012-8
* Screwdriver STHT72992
* Deburrer
* Steel Tape 5X19M
* Hacksaw
* Cleaning Brush
* Small Cloth
* File With Handle
* PVC File Handle
* Hand Gloves
* Adjustable Spanner 8” RX21-08
* Magnetic level bottle

Mighty Mounts L-Bracket Stand 20 SS

Order Code : MM37

Features :

  • Strong, sturdy bracket stands
  • Complete kit with regular accessories
  • Simple & Easy On- Site Installation

Technical Specifications :

Max. Load (kg.) 100 kg.

Size (mm) 500×500

Fitment Mounting Angles (qty. 2)

Brackets (qty.2)

Assembly Accessories Anchor Bolt 10 x 75 mm (qty. 6)

Hex Philips Bolt 10 x 15 mm (qty. 6) Nut 10mm (qty. 6)

Washer 10 mm (qty. 6)

Installation Accessories Spring Washer (qty. 6)

Anti Vibration Pad (qty. 4)

Mighty Mounts L-Brackets Stands 24 Powder Coated

Order Code: MM34

Features :

  • Strong, sturdy bracket stands.
  • Complete kit with regular accessories.
  • Simple & Easy On- Site Installation.

Technical Specifications :

Max. Load (kg.) 100 kg.

Size (mm) 600×500

Fitment Mounting Angles (qty. 2)

Brackets (qty.2)

Assembly Accessories Anchor Bolt 10 x 75 mm (qty. 6)

Hex Philips Bolt 10 x 15 mm (qty. 6) Nut 10mm (qty. 6)

Washer 10 mm (qty. 12)

Installation Accessories Spring Washer (qty. 6)

Anti Vibration Pad (qty. 4)

Mighty Mounts L-Brackets Stands 20 Powder Coated

Order Code : MM33

Features :

  • Strong, sturdy bracket stands.
  • Complete kit with regular accessories.
  • Simple & Easy On- Site Installation.

Technical Specifications :

Max. Load (kg.) 100 kg.

Size (mm) 500×500

Fitment Mounting Angles (qty. 2)

Brackets (qty.2)

Assembly Accessories Anchor Bolt 10 x 75 mm (qty. 6)

Hex Philips Bolt 10 x 15 mm (qty. 6) Nut 10mm (qty. 6)

Washer 10 mm (qty. 6)

Installation Accessories Spring Washer (qty. 6)

Anti Vibration Pad (qty. 4)

Mighty Mounts Mighty foot Modular Framework

Features :

Modular Framework for HVAC Equipment

  • No penetration of roof slab
  • Weatherproof
  • Includes Anti vibration pads
  • Save Time
  • Cost effective / Customised design
  • Simple & easy installation

Suitable for –

– PIPEWORK / DUCTWORK
– EVAPORATORS / SPLITS
– SOLAR PANELS
– CABLE TRAYS / AIR HANDLERS
– VRV’S / VRF’S
– CHILLERS / CONDENSERS