Mastercool 99661 Digital Manifold with Superheat Subcool

Order Code : MS35

Features :

  • Most Advanced & User friendly Digital Manifold.
  • Displays – Pressure; Saturated, Actual, Superheat & Subcooling Temperatures for over 60 refrigerants.
  • Displays actual temp. & calculates Superheat / Subcool temp.
  • ABS material construction & protected by rugged rubber boot.
  • Deep vacuum display in 7 different units.
  • Pressure display in 5 different units.
  • A Quality product from Mastercool, USA.
pdf-Mastercool99661-ADigitalManifoldwithSuperheatSubcool
 

 

Mastercool 93636 MR 2-Way RAC Manifold

Order Code : MS17

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm hoses.
  • Free floating piston valve design.
  • Double O- Ring allows for much better seal resulting in less leaks.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R134a, R22, R12, R404A.
  • A Quality product from Mastercool, USA.

Mastercool 93636 E 2-Way RAC Manifold

Order Code : MS18

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm hoses.
  • Free floating piston valve design.
  • Double O- Ring allows for much better seal resulting in less leaks.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R410A, R507A, R404A, R22.
  • A Quality product from Mastercool, USA.

Mastercool 57236 MR 2-Way Sight Glass Manifold

Order Code : MS23

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm ball valve hoses.
  • Features Premier Series Ball Valve design.
  • Nylon barrier with in-line ball valve.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R134a, R22, R12, R404A.
  • A Quality product from Mastercool, USA.

Mastercool 57236 E 2-Way Sight Glass Manifold

Order Code : MS24

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm ball valve hoses.
  • Features Premier Series Ball Valve design.
  • Nylon barrier with in-line ball valve.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R410A, R507A, R404A, R22.
  • A Quality product from Mastercool, USA.

 

Mastercool 40336-40360 Refrigerant Hoses

Order Code : MS25 & MS26

Features :

  • Refrigerant hoses of highest quality.
  • Working Pressure – 52 BAR, Burst – 210 BAR, 1/4 ” SAE Fittings.
  • Knurled brass nuts make finger tightening easy.
  • Crimped with 8 segment dies for secure fit & max. durability.
  • Hose Length – 90 cm / 150 cm.
  • A Quality product from Mastercool, USA.

Mastercool 33636 MR 2-Way Brass Manifold

Order Code : MS20

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm hoses.
  • Free floating piston valve design.
  • Double O- Ring allows for much better seal resulting in less leaks.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants -R134a, R22, R12, R404A.
  • A Quality product from Mastercool, USA.

Mastercool 33636 E 2-Way Brass Manifold

Order Code : MS22

Features :

  • Constructed of the finest material & machined to highest quality standards.
  • Every Mastercool manifold is built to last.
  • 3 – 90 cm hoses.
  • Free floating piston valve design.
  • Double O- Ring allows for much better seal resulting in less leaks.
  • Colour coordinated for easy refrigerant recognition.
  • For refrigerants – R410A, R507A, R404A, R22.
  • A Quality product from Mastercool, USA.

Alstashine Coil Cleaner

Order Code : CHEM02

Features :

  • Non- acidic liquid cleaner & brightener.
  • Copper, aluminium friendly.
  • Complete removal of dust, dirt, oily soils, carbon deposits, grime.
  • Cleaning of aluminium fins & copper coils of AHU/ FCU/ AC’s ( Indoor / Outdoor) air- cooled chillers / condensers, air cooler tube bundle.
  • Air Conditioning System
    PACK
    Components
    Air supply
    Operation of PACK
    Air distribution
    Recirculation
    Temperature Control
    Air Conditioning System in modern aircraft
    The air conditioning system is supplied by air processed through two packs that regulate airflow and temperature as required. Airplane air conditioning system mix hot and cold air to achieve the desired temperature.

    Aircraft types vary, but the principles and operations of the air conditioning system are the same in all aircraft. The primary parts of the air conditioning system have these functions:

    Control fresh air flow for airplane pressurization and ventilation
    Control the flight compartment and passenger cabin temperature
    Recirculate cabin air for ventilation
    Air Conditioning Pack
    The pack allows bleed air to be cooled for conditioning the flight and passenger compartment. The air conditioning system is based on an Air Cycle Machine (ACM) cooling device, which is mostly used in turbine-powered aircraft. The air cycle system is often called the air conditioning package or Pack.

    Usually, Air conditioning packs are located left and right wing to body area near the main landing gear of an airplane. Packs remove the excessive heat from bleed air entering to packs from the aircraft bleed air system and supplies air to the cabin at the desired temperature visit FlyBy Aviation Academy.

    Air Conditioning Components

    Major components of the air conditioning pack are:-

    Pack valve – Flow control and shutoff valve (FCSOV) controls the flow of bleed air into the pack.
    Primary Heat Exchanger – Cools the engine/APU bleed air.
    Secondary Heat Exchanger – Removes the heat of compression of the ACM.
    Air Cycle Machine (ACM) – An ACM comprising a compressor and a turbine mounted on the same shaft.
    Condenser – Condenser uses refrigerated turbine discharge air to cool incoming bleed air to a temperature low enough (below the dew point) for moisture condensation to occur.
    Re-heater – The reheater is used to raise the temperature of the air before it reaches the turbine inlet to vaporize any remaining water droplets for turbine protection.
    Water Extractor – The water extractor removes the water from the moisture produced by the condenser.
    Water Spray Nozzle – It is located at the secondary heat exchanger inlet and sprays on it water drained from the water extractor in order to increase the cooling capacity of the heat exchanger.
    Air supply for Pack operation
    The air cycle air conditioning system is supplied with air by the aircraft pneumatic system. In turn, the pneumatic system is supplied by bleed air tap-offs on each engine compressor section or from the APU pneumatic supply. Bleed air from the pneumatic manifold is directed into a primary heat exchanger of Packs.

    Operation of Air Conditioning Pack
    When bleed air goes through the primary heat exchanger, ram air removes some of the heat. This partially cool bleed air goes to the compressor section of the air cycle machine. The compressor section increases the pressure and temperature of the partially cool bleed air. This compressed-air goes to the secondary heat exchanger.

    Air from the ACM compressor outlet flows through the secondary heat exchanger. A cross-flow of ram air removes heat before the air enters the ACM turbine inlet.

    Air conditioning is provided in aircraft for the comfort of passengers. The same conditioned air is also used for cabin pressurization in the airplane.

pdf-AlstashineCoilCleaner

Alstascale DS 40 for descaling degrading derusting

Order Code: CHEM06

Features :

  • 3 in 1 compound for removal of scale, rust & greasy deposits in water systems.
  • Useful for chillers, AHU, PHE, FCU, Boiler/ Geyser, Vacuum pump decalcifier.
  • Removes heavy deposits of water scale & iron oxides.
  • Suitable for removing lime / rust deposits and oily contaminants MS, SS, Cast Iron, Cu, Cu-Ni, Brass friendly.
pdf-AlstascaleDS40Fordescalingdegradingderusting

Alstarinse Refrigerant Line Flushing Solvent

Order Code : CHEM07

Features :

  • Excellent for flushing out carbon, moisture, dirt, oil, etc from refrigerant & compressor line in AC, car AC, compressors, refrigerators, thermic fluid degreasing etc.
  • Completely volatile or vaporising in nature.
  • Dries quickly and leaves no residue.
  • Better option for planet earth than CTC ( Grease Killer / carbon tetrachloride ) as it is without the hazard of ozone depletion.
pdf-AlstarinseRefrigerantLineFlushingSolvent

Kyowa KYC 208 Jet Pressure Water Pump

Order Code : KWA01

Features :

  • Most suitable for Airconditioner Cleaning.
  • Unique oil less pump is compact, super lightweight.
  • Unbeatable in pumping performance.
  • Very Durable & long lasting.
  • Adjustable pressure for Evaporator & Condenser cleaning.
  • A Quality product from Kyowa, Japan.

Other Applications –

  • Car engine compartment Cleaning.
  • Washing and finishing in plasterers work.
  • Tool processing equipment Cleaning.
  • Farm tool and machine Cleaning.
  • Insecticide spraying in gardens and to trees.
  • Printing machine Cleaning.
  • Steel Pipe Cleaning.
pdf-KyowaKYC208JetPressureWaterPump
 

 

 

 

 

 

Mastercool HYDRA SWAGE 71650(Tube Expander Kit)

Order Code : MS09

Features :

  • It uses Hydraulic Power to expand Copper, Aluminium and Soft Steel Tubing.
  • The process of Swaging becomes easy and effortless for the HVAC / R technician.
  • Hydra – Swage contains 10 expander heads beginning from size 3/8 ” up to 2 1/8 “.
  • A very innovative and unique product. It can Save you –
    *100 % Of Your Coupling Costs
    *50% Of Your Brazing Costs
    *
    Reduce Chances Of Leakages To Half !!!
  • A Quality product from Mastercool, USA.
pdf-MastercoolHYDRASWAGE71650-TubeExpanderKit
 

http://www.youtube.com/watch?v=tLmf09FF0kE&feature=plcp

 

 

 

Mastercool Hydra Krimp 71500

Order Code : MS10

Features :

  • Fabricating A/C hoses just got easier with the Hydra – Krimp.
  • Hydra- Krimp makes crimping barbed and beaded fittings as easy as 1-2-3.
  • Hand held hydraulic press.
  • Lightweight and very portable .
  • Ideal for carrying to site and field applications.
  • Contains Complete set of dies for hose sizes #6, #8, #10, #12 & reduced barrier sizes #6, #8, #10, #12.
  • A Quality product from Mastercool, USA.

 

pdf-MastercoolHydraKrimp71500
 

http://www.youtube.com/watch?v=jkIiSWXhw6w&feature=plcp

 

 

 

Mastercool 71700 Hydraulic Flaring and Swaging Tool

Order Code : MS08

Features :

  • Hydraulic press does both, flaring and swaging.
  • It really takes the work out of Swaging and flaring, especially on larger tube sizes.
  • Includes dies and adapters for copper tubing sizes – 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″ and 7/8″.
  • Comes in custom moulded carrying case.
  • A Quality product from Mastercool, USA.
pdf-Mastercool71700HydraulicFlaringandSwagingTool

Mastercool 71550 Manual style AC Hose Crimper

Order Code : MS11

Features :

  • Manual style A/C Hose Crimper.
  • Unit can be mounted on a bench using Holding fixture or held securely in a vice.
  • Kit comes with a complete set of dies covering standard hose sizes #6, #8, #10, #12.
  • A Quality product from Mastercool, USA.

 

pdf-Mastercool71550ManualstyleACHoseCrimper
 

http://www.youtube.com/watch?v=t9D4GC1Plx8&feature=plcp

 

SHIBUYA TS 162 Core Drilling Machine

Order Code : SHIB02

Features :

  • The tagline of this model is “No compromise”!
  • It sets a new standard for core drilling machines.
  • It gives more durability with reduced weight.
  • It has more power from a downsized electric motor.
  • Less noise with increased cooling capacity.
  • A Quality product from Shibuya, Japan.
pdf-SHIBUYATS162CoreDrillingMachine

Mighty Mounts L-Bracket Stand 20 SS

Order Code : MM37

Features :

  • Strong, sturdy bracket stands
  • Complete kit with regular accessories
  • Simple & Easy On- Site Installation

Technical Specifications :

Max. Load (kg.) 100 kg.

Size (mm) 500×500

Fitment Mounting Angles (qty. 2)

Brackets (qty.2)

Assembly Accessories Anchor Bolt 10 x 75 mm (qty. 6)

Hex Philips Bolt 10 x 15 mm (qty. 6) Nut 10mm (qty. 6)

Washer 10 mm (qty. 6)

Installation Accessories Spring Washer (qty. 6)

Anti Vibration Pad (qty. 4)

Mighty Mounts L-Brackets Stands 24 Powder Coated

Order Code: MM34

Features :

  • Strong, sturdy bracket stands.
  • Complete kit with regular accessories.
  • Simple & Easy On- Site Installation.

Technical Specifications :

Max. Load (kg.) 100 kg.

Size (mm) 600×500

Fitment Mounting Angles (qty. 2)

Brackets (qty.2)

Assembly Accessories Anchor Bolt 10 x 75 mm (qty. 6)

Hex Philips Bolt 10 x 15 mm (qty. 6) Nut 10mm (qty. 6)

Washer 10 mm (qty. 12)

Installation Accessories Spring Washer (qty. 6)

Anti Vibration Pad (qty. 4)

Mighty Mounts L-Brackets Stands 20 Powder Coated

Order Code : MM33

Features :

  • Strong, sturdy bracket stands.
  • Complete kit with regular accessories.
  • Simple & Easy On- Site Installation.

Technical Specifications :

Max. Load (kg.) 100 kg.

Size (mm) 500×500

Fitment Mounting Angles (qty. 2)

Brackets (qty.2)

Assembly Accessories Anchor Bolt 10 x 75 mm (qty. 6)

Hex Philips Bolt 10 x 15 mm (qty. 6) Nut 10mm (qty. 6)

Washer 10 mm (qty. 6)

Installation Accessories Spring Washer (qty. 6)

Anti Vibration Pad (qty. 4)

Mighty Mounts Mighty foot Modular Framework

Features :

Modular Framework for HVAC Equipment

  • No penetration of roof slab
  • Weatherproof
  • Includes Anti vibration pads
  • Save Time
  • Cost effective / Customised design
  • Simple & easy installation

Suitable for –

– PIPEWORK / DUCTWORK
– EVAPORATORS / SPLITS
– SOLAR PANELS
– CABLE TRAYS / AIR HANDLERS
– VRV’S / VRF’S
– CHILLERS / CONDENSERS

 

 

 

 

 

Mastercool 70053 45° Flaring & Swaging Tool Kit

Order Code : MS49

Features :-

  • Durable forged steel slip – on yoke. Bars are chrome plated, hardened steel.
  • Swages in close quarters where punch style cannot be used.
  • Includes custom molded plastic box.
  • 45° Flaring & Swaging Tool set includes.
  • Two flaring Bars covering 9 sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 and 3/4″ O.D. Tubing.
  • Five Swaging Adapters covering 7 sizes: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4″ O.D. Tubing.
  • A Quality product from Mastercool, USA.